Who searching for the best quality knives, then CPM-3V steel is the best for you because they provide some of the best properties.
The steel is very tough, providing better toughness than all of the grades listed here with the exception of CPM- 1V®. Without any hesitation, you can purchase this one that comes with good wear resistance, about 50% better than D-2 and cab hard to RC -56-60.
What is CPM 3v Steel?
CPM 3V is top toughness, wear-resistant tool steel. It comes with long-lasting performance and beautiful features. On the other hand, for this best-quality service, the steel great for stamping tools, blanking tools, knives, and scrap choppers.
Is CPM 3V steel good for knives?
As from features, the CPM 3v provides dimensional stability and toughness, as well as extra-fine carbides in the steel itself that enable your knife to stay sharper, longer. Even, the steel specially design for exceptional flexibility, shock resistance and wear.
CPM 3v steel knives
1. Benchmade 200 Puukko
No products found.
The Benchmade 200 Puukko is one of the best knife in the market that comes with 3.75” drop point plain edge blade, it has a beautiful satin finish, and a rubberized Santoprene handle.
It made from the CPM-3V, which makes very tough and high corrosion-resistant. So who looking for best quality knives, then it will great choice for you. That comes with it personal sheath.
Do you why most of the people love this one, generally they made the best of it, and not just the steel, the design is stunning! It comes with sheath and the handle is very practical and easy to grab. So, we highly recommend this knife to anyone wishing to purchase a CPA-3V knife.
Read More 14c28n vs 12c27 Knife Steel: Which Provide Better Value
Consideration Before Buying
CPM 3v Tool Steel Chemical composition
| Materials | Quantity | Works |
| Carbon | 0.8 % | Improves hardness wear/corrosion resistance.
Unfortunately a high amount of it decreases strength. |
| Chromium | 7.5 % | Great for tensile strength and Edge retention. Even it enhances corrosion resistance and wear resistance |
| Manganese | 0.4 % | It improves hardness and brittleness. |
| Phosphorus | 0.03% | Improves strength. |
| Sulfur | 0.03% | Improves machinability. |
| Molybdenum | 1.3% | The material increase machinability and strength. |
| Vanadium | 2.75% | It improves wear resistance and hardenability. |
| Tungsten | 0.4% | The steel wear resistance and hardness. |
| Silicon | 0.9% | Perfect for strength. |
CPM 3v VS Steel
In this part, we’re going to compare the CPM 3v steel with other steel, and for this, we use for criteria: edge retention, ease of sharpens, corrosion resistance, and toughness, and even we use a scale from 1 to 10.
CPM 3v vs elmax
| CPM 3V | Elmax | works |
| 6/10 | 9/10 | EDGE RETENTION |
| 5/10 | 5/10 | EASE OF SHARPENING |
| 4/10 | 1/10 | CORROSION RESISTANCE |
| 10/10 | 7/10 | MARKET POPULARITY |
[Elmax]: Honestly, Elmax steel is most popular high-end powder metallurgy stainless steel. That is great for high wear resistance, high compressive strength, corrosion resistance and very dimensional stability.
Read More 14c28n vs d2 – Which Model For Best
CPM 3v vs m390
| CPM 3V | M390 | works |
| 6/10 | 9 | EDGE RETENTION |
| 5/10 | 2 | EASE OF SHARPENING |
| 4/10 | 7 | CORROSION RESISTANCE |
| 10/10 | 6 | MARKET POPULARITY |
[M390]: Why is M390 one of the most popular? The question comes with a short answer: sharpness retention. That so wears and tear resistance. It also correctly maintains the shape of the edge. As from features, as such, a knife made from M390 steel will retain its sharpness for a very long time. That’s why most people love this one.
cpm 3v steel vs s30v
| CPM 3V | S30V | works |
| 6/10 | 6 | EDGE RETENTION |
| 5/10 | 5 | EASE OF SHARPENING |
| 4/10 | 4 | CORROSION RESISTANCE |
| 10/10 | 10 | MARKET POPULARITY |
[S30V]: CPM S30V steel comes with wonderful edge retention and resists rust effortlessly. That is great for high-end premium pocket knives and expensive kitchen cutlery.
CPM 3v steel vs 1095
| CPM 3V | 1095 | works |
| 6/10 | 3 | EDGE RETENTION |
| 5/10 | 8 | EASE OF SHARPENING |
| 4/10 | 4 | CORROSION RESISTANCE |
| 10/10 | MARKET POPULARITY |
[1095]: Is 1095 steel good for knives? Yes because it comes with most popularity in the market, that 10-series standard carbon steel with low corrosion resistance and average edge retention properties. The steel is great for resistant to chipping that is easy to sharpen, takes a crazy sharp edge and is reasonable to produce.
CPM 3v steel vs s35vn
| CPM 3V | S35VN | works |
| 6/10 | 7 | EDGE RETENTION |
| 5/10 | 5 | EASE OF SHARPENING |
| 4/10 | 7 | CORROSION RESISTANCE |
| 10/10 | 8 | MARKET POPULARITY |
CPM 3v vs d2
| CPM 3V | D2 | works |
| 6/10 | 8 | EDGE RETENTION |
| 5/10 | 3 | EASE OF SHARPENING |
| 4/10 | 2 | CORROSION RESISTANCE |
| 10/10 | MARKET POPULARITY |
[D2]: D2 steel is a ordinary tool steel and knife steel. The steel is professionally popular such as the Japanese designation SKD11, Uddeholm Sverker 21, German designation 1.2379, Hitachi SLD and others. Which knife for best? How long sharpen? Where did it come from? How do its properties compare to other steels? Find your right answers here!
Conclusion:
Finally, this CPM-3v steel review comes with the professional strengths and capability of this popular steel option.
It means you should note what you will require from your knife or tool to determine if this is the perfect choice for your project.
Who needs steel that will not break or chip when you use it harshly and last for many use cycles than CPM 3V steel would be perfect for you.
Even you durable knife steel, then you can read another review CPM M4 steel review.