Who looking for Chinese steel with similar performance characteristics to AUS-8. 8Cr14Mov, then this is the best option for the money.
The steel lacks the edge retention of the higher end steels but can take a wicked edge and is reasonably tough and corrosion resistant. On the other hand they come with reasonable price.
Besides, 440C is specially considered a lower end knife steel in the market. That is commonly use in medium to high grade knives in Europe. The steel is a high-chromium stainless steel with terrific balance of good toughness and corrosion resistance. Even the steel takes a nice edge and is fairly easy to reshapes.
In our 8cr13mov vs 440c steel compared review, we hope you will find the best for your needs.
8cr13mov vs 440c Comparison:
1. Best 8Cr13MoV Knives Review
- Game Changer - Being tenacious means you are persistent and cohesive. It's being...
- Superior Blade Steel - The 3.39" 8Cr13MoV stainless blade is coated in a...
- A Secure Grip - It has a black G-10 laminate handle, Ergonomically milled with...
- Easy-to-Use - The blade's shape coupled with an oversized Spyderco Round Hole...
This page highly recommends the Spyderco Tenacious Value Folding knife, which comes with professional looks for right size KDC knife on a budget.
Who searching for good prices knife, then this is very good for its affordable price. We’ll tell you why first you have a 3.4-inch drop point straight edge blade made from the 8cr13mov; which makes the knife perfect corrosion resistance and toughness. Next reason the handle that has a G-10 handle.
After all, when you being tenacious means, you are persistent and cohesive. Since the knife was made from high-quality material, it is best for cutting.
Coupled with an oversize Spyderco round hole and textured spine jumping.
2. QSP Heavy Duty Pocket Knife Review
- Razor sharp 440C full edge Blade, HRC58-60, Non-Slip G10 Handle
- Left or Right Handed Flipper, Ball Bearing Smooth and Fast Opening
- G10 spine, Sturdy constructed, feel comfortable in hands
- Applicated for heavy duty work. 5.2" Handle, Net weight 177g, Good for Left...
Our top pick for the best pocket knife is the QSP Heavy Duty Pocket Knife with Ball Bearing Flipper Fast Opening. With a razor-sharp blade that stays sharp over the long term, a sturdy and comfortable ambidextrous handle, and a highly-responsive.
It sharp 440c full edge blade, and non-slip G10 handle.
The razor sharp design has a very sharp point that gives an excellent control, making the razor a perfect choice for detailed work, drilling and cutting.
However, the razor blade has a notch in the nail, which makes it easy and safe to open. On the other hand, locking machnisum ensures that the blade remains open and that you have strength and security while work.
We have already spend some time cover the best quality steel review you can check here 3cr13 steel.
8cr13mov vs 440c Compared
What 8Cr13MoV Steel
8Cr13MoV blade steel is a Chinese stainless-steel grade that is specially used for home scissors and knives. The comparable hardness, low cost, and ease of manufacturing enabled the steel to gain the most popularity in kitchen knives. Even, Chinese grade is equivalent to Aichi AUS 8 steel with carbon content to the higher side.
This is a high carbon – high chromium alloy use for a kitchen knife. These types of steel generally contain several primary and secondary carbides along with cementite. Which is responsible for higher hardness and cutting ability.
What is 440c Steel
Especially 440c stainless steel is a high carbon martensitic stainless steel. That comes with high strength, moderate corrosion resistance, and perfect hardness and wear resistance.
On the other hand, it is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys.
Get for more details you can read our another compared review: 14c28n vs 440c.
Is 8Cr13MoV good knife steel?
Everyone knows that these types of knife material come with reasonable price, and they provide Decent Edge retention, corrosion resistance, and hardness and wear resistance.
As from features, for this low price, so the answer is yes compared to other budget steel knives. So, without confusion, you use it as an EDC knife, kitchen knife or hunting knife, but be prepared to take good care of it.
Is 440c steel good for knife?
If you looking for stainless steel, then you can use these 440c because it is mid-range stainless steel that provides perfect corrosion resistance and perfect water resistance and will take a wonderful mirror polish. That’s why this is good for knives and provides long-lasting using performance.
Is 8Cr13MoV steel easy to sharpen?
The high hardness of approximately 60HRC makes the steel easy to sharp 8Cr13MoV knifes.
Is 440c steel easy to sharpen?
440c get most popularity for its blocky carbide structure and large grain. The steel can certainly take a sharp edge but will never be like razor blade steel. There is one the best advance it will cut through the carbides. Get for best result keep your synthetic stone clean and I’m pretty sure any of them can do that.
8cr13mov steel hardness
The 8cr13mov steel can quench at 1050 °C to obtain the highest hardness value, the Rockwell hardness can reach above 62 HRC. This high hardness helps to improve the sharpness and wear resistance of the knife. As from features, to improve corrosion resistance and toughness, a secondary tempering process can be selected.
Top get a wonderful steel to check out our review about the 14c28n vs 8cr13mov.
440c steel hardness
440c is a martensitic 400 series stainless steel, and it the high-quality content from 400 stainless steel series. That is usually heat treated to reach hardness of 58-60 HRC. Use can use for this bearing steel, and use in rolling contact stainless bearing, e.g. ball bearings and roller bearings.
8Cr13MoV steel composition
| Material | Quantity | Work |
| C | 0.7 – 0.8 | It can improve hardness and corrosion resistance; on the other hand a high amount of it decreases strength. |
| Si | <1.0 | It will improve strength. |
| Mn | <1.0 | It that can increase hardness and brittleness. |
| P | <0.04 | Improves strength. |
| S | <0.03 | It can increase machinability. |
| Cr | 13.00 – 4.50 | This for tensile strength and edge retention and enhances corrosion resistance and wear resistance. |
| Mo | 0.10 – 0.30 | The material increase machinability and strength. |
| Ni | <0.6 | It can improve toughness. |
| V | 0.10 – 0.25 | It improves wear resistance and hardenability. |
440c steel composition
| Materials | Quantity | Works |
| Carbon | 1.1% | Improves hardness Wear/corrosion resistance Unfortunately a high amount of it decreases strength. |
| Sulfur | 0.02% | It will increases machinability |
| Molybdenum | 0.70% | It increase Machinability and strength |
| Manganese | 0.80% | It improves hardness and brittleness. |
| Chromium | 17.00% | Great for tensile strength and Edge retention. Even it enhances corrosion resistance and wears resistance. |
| Phosphorus | 0.20% | Improves strength. |
| Silicon | 0.50% | Great for strength. |
8Cr13Mov vs 440c steel properties
| 8cr13mov | 440c | Work |
| 3 | 2.5 | EDGE RETENTION |
| 5 | 7 | CORROSION RESISTANCE |
| 8 | 7 | EASE OF SHARPENING |
| 6 | 5 | TOUGHNESS |
8cr13mov Compared with Others Steel
8cr13mov vs 440c
According to our research 8Cr13MoV blade steel, 440C has a higher carbon (0.95-1.2%) and chromium (16-18%) content. On the other hand, 440c is a high grade and high wear resistant steel that comes with an excellent edge retention.
When you compare these two brand, you can say 440c is a step-up model if we talk about hardness and edge retention.
8cr13mov vs vg10
VG10 comes with higher carbon that is more corrosion resistant and harder than Chinese steel but for daily use for 8cr13mov has still better edge plenty. In this two brand, due to higher alloying the toughness of vg10 is also lower than 8cr13mov.
In this two steel , one must know that vg10 is more prone to chipping, so for daily it is always better to choose 8cr13mov steel.
AUS 8 vs 8cr13mov
Aus 8 and 8cr13mov almost comes with similar features in carbon content, however, the former is Japanese grade steel having 3 times more molybdenum and vanadium than 8Cr13MoV. On the other hand, Aus8 is better to edge retention and toughness as compared to the Chinese variant.
When you looking these two steel you must need to consider their features, quality is comparable, however in a little detail, we can say Aus 8 can take a bit more stress and it cannot retain edge as a Chinese variant. Besides, 8Cr13MoV high carbon stainless steel can keep a fine and sharp edge longer but it is more prone to chipping if it hits a harder surface.
8cr13mov vs 440c – Final Verdict
When you are looking for the most rigid steel or the most demanding steel, then 8cr13MoV is not for you. Because the steel is cost-effective steel that reasonably well does all of these things, you may have the correct steel for your next knife.
On the other hand, 440c, to the best of our recommendation, is good steel. When you aren’t a fan of stainless, then this is the best way for you Because most of our knives are made of carbon tool steel, but 440c has a good reputation.
If the budget isn’t limited, our best-compared review of the 7cr17mov vs 8cr13mov you shouldn’t miss out on!
Besides, if you don’t want to spend a small fortune, our budget pick will satisfy you even more than you expect!