5cr15mov vs vg10 Stainless steel: Which the Best Way

5cr15mov vs vg10 ReviewIf you have ready about the 5cr15mov vs vg10 steel for knives, you will know how amazingly sharp and robust they are.

In our opinion, these two steel are great at their job. These 5cr15mov knife steel and vg10 steel knives are long-lasting, sharp, and durable. Their design is also unique and sophisticated. On the other hand, these two steel have a varied range of knives from where you can choose the best one for you.

5cr15mov stainless steel blade or vg10 super steel are built with stainless steel. Some have non-stick ceramic coating all over them. Like some outdoor use for knives, these are not heavily weighted. Even they are well-balanced knives that help with their outstanding performance.

You may also like to check out our compared guide for top steel– 12c27 vs vg10.

5cr15mov vs vg10 Stainless steel Comparison:

1. SOG Small Fixed Blade Knife

SOG Small Fixed Blade Knife - Instinct Boot Knife, EDC Knife, Neck Knife,...
  • SMALL KNIFE WITH SHEATH: The SOG Instinct is the perfect small fixed blade knife...
  • LIGHTWEIGHT EDC KNIFE: 2.3 oz. Slim necklace knife is a great everyday carry...
  • FULL TANG FIXED BLADE KNIFE: Durable satin-polished 5Cr15MoV stainless steel...
  • FIXED KNIFE WITH TEXTURED G10 HANDLE: G10 handle with finger grooves and jimping...

If you’re searching for a little knife, you can purchase the SOG Small Fixed Blade Knife. It comes with ergonomics design, lightweight, strength, and efficiency.

As from features, the knife includes 2.3 stains polished clip point blade with perfect for corrosion resistance and hardness; next up it is the ergonomics of the knife, with the index finger choil and thumb ramp.

Without any hassle, you can easily use the knife because it is comfortable in hand and can be dragged very fast of the sheath, and finally, the G10 handle provides the blade more resistance and strength.

According to our research, the knife material SOG for taking a low-end steel and making glow in a knife like this. After all, if you need a small EDC knife, then you can purchase this one.

2. QSP Heavy Duty Pocket Knife Review

QSP Smooth Opening Folding Pocket Knife Ball Bearing System, 440C Blade G10...
  • Razor sharp 440C full edge Blade, HRC58-60, Non-Slip G10 Handle
  • Left or Right Handed Flipper, Ball Bearing Smooth and Fast Opening
  • G10 spine, Sturdy constructed, feel comfortable in hands
  • Applicated for heavy duty work. 5.2" Handle, Net weight 177g, Good for Left...

Our top pick for the best pocket knife is the QSP Heavy Duty Pocket Knife with Ball Bearing Flipper Fast Opening. With a razor-sharp blade that stays sharp over the long term, a sturdy and comfortable ambidextrous handle, and a highly-responsive.

It sharp 440c full edge blade, and non-slip G10 handle.

The razor sharp design has a very sharp point that gives an excellent control, making the razor a perfect choice for detailed work, drilling and cutting.

However, the razor blade has a notch in the nail, which makes it easy and safe to open. On the other hand, locking machnisum ensure that the blade remains open and that you have strength and security while work.

5cr15mov vs vg10 Compared

What is 5Cr15Mov:

The 5Cr15Mov is very low- stainless steel that high in Chromium for corrosion resistance. Especially the steel made for the knife industry.

If you are confused and want great knives steel then you may go for 12c27 vs 420hc steel for knives these two steel are the best value for money and time.

What is vg10 steel

A knife is a tool with cutting edge often attached to a handle. When you have the best quality knife that does a better job of cutting, which is obvious enough, but it also lets you work faster and safer.

However, VG10 is a high-end Japanese stainless steel, that high in carbon and Vanadium. That is one of the best tool and most popular steels in Japan.

Is 5Cr15MoV steel good for Knives?

When you have right quality material knife, then you can easily sharpen and use for your kitchen. On the other hand, 5cr15mov great invest for your blades set.

Because it has a good corrosion resistance and it’s easy to sharpen so, the steel will be an excellent knife for kitchen chef and fisherman, but if you intend to use for an EDC knife, then we wouldn’t recommend it, because it’s not a very hard knife. The knife steel doesn’t hold an edge for long.

Is VG 10 stainless steel Good for knives?

The VG 10 stainless steel high-end with a balanced chemical composition provides perfect edge retention; wear resistance, corrosion resistance, hardness, and toughness.

That’s why the question is pretty obvious here.

Honestly, this is good for knives because it’s trendy in Japan if you’re working in a humid environment.

Is 5cr15mov steel easy to sharpen?

5cr15mov steel is straightforward for users to sharpen.

Most of the people love this one that is ideal steel for whetting beginners or those who are tired of getting a razor-sharp edge on more rigid steel.

As from features, it comes with superior capability that can gain an incredibly high level of sharpness.

For this strongpoint that helps apprentices easily get a sharp-shaved 5Cr15MoV steel.

VG 10 Stainless Steel Equivalent

According to chemical data of steel and being high-end steel at the same time, we find that the VG-10 is close to the 154CM.

However, we still believe that this is perfect than the VG10, but they are both excellent in edge retention, wear resistance, corrosion resistance, and toughness, and they’re in the same price range.

5cr15mov steel hardness

5cr15mov the steel can vary widely depending on the type of heat treatment applied to the knife. That is generally hardened to about 52 to 56 HRC.

Vg10 steel hardness

The vg10 is very hard and also very tough. That comes with perfect edge retention and is surprisingly easy to sharpen. The steel made by Takefu Special Steel Company, that is a favorite by chefs for its perfect balance as a hard working knife and durability in that its edge can withstand long shifts. It comes with an HRC of 60-61.

After all, our experts have created a thorough guide on the knife steel that you must check out – 1095 steel vs 440c Steel for Knives.

5Cr15MoV steel composition

Materials              Quantity            Works
Chromium 15% Perfect for tensile strength and Edge retention. On the other hand it enhances corrosion resistance and wear resistance
Manganese 0.40% It improves hardness and brittleness.
Vanadium 0.10% Increases wear resistance and hardenability.
Carbon 0.5% It will increase hardness Wear/corrosion resistance Unfortunately a high amount of it decreases strength.
Molybdenum 0.6% It increase Machinability and strength

5Cr15MoV steel properties

To sum up the chemical composition and the HRC of the steel, the 5Cr15MoV Steel has the following features:

5Cr15MoV Corrosion Resistance: It provides wonderful corrosion resistance, with more than 15% of chromium.

5Cr15MoV Edge Retention: The steel comes with good edge retention, that is not very hard and it comes with low portion of Carbon in it.

5Cr15MoV Wear Resistance: This is medium to excellent wear resistance.

5Cr15MoV Sharpness: The chemical composition says the more challenging the steel, the harder to sharpen it, that is easy to sharpen since it’s not as hard as steel.

5Cr15MoV Toughness: Perfect toughness. That can endure low to mid of the challenging work.

What are the VG 10 Stainless steel Properties

However, according to the chemical composition and the HRC of the VG10 stainless steel, that provides the following properties:

Edge Retention: It comes with 60HRC steel. And the VG 10 is hard steel that offers great edge retention.

Corrosion Resistance: It includes 15.5% of chromium is great evidence of the excellent corrosion resistance of the VG10. For this reason, its one of the best steel for corrosion resistance.

Wear Resistance: This is high-end steel and with high carbon volume, that’s why the VG10 steel offers a great wear resistance.

Sharpness: Do you know is VG 10 steel easy to sharpen?

Yes. The combination of the VG 10 steel makes its hard steel and easy to sharpen at the same time. Therefore the sharpening experience won’t be so hard for the VG10.

Machinability: When you have these types knife the VG10 is very machinable and easy to grind.

Toughness: The VG10 is very sturdy steel, being stainless steel with a high level of chromium in it. And it has Molybdenum which gives it a high toughness and strength.

5cr15mov vs vg10 – Final Verdict

After all, what are you waiting for? Select the steel from this 5cr15mov vs vg10 steel review and enjoy the luxury of cutting.

After all, do be careful while using these steel and try not to cut yourself with them. And these two stainless steel knives are always best to keep the knife in a safe place where kids cannot easily reach them.

Amazon Best Sellers in Pocket Knives & Folding Knives