Here’s our guide to find the compared 440c steel vs vg10. However, both steel comes with different features and performance.
On this page, we have a collection of 2 beautiful stainless steel knives. They are that has gone into handcrafting. This steel is evident in every single image. As for features, these two knives provide the best results.
These two knives are great for adventure self-defense because they are ultrasharp, durable, excellent pocket knives for men with a long resistance sharp blade.
440c steel vs vg10 Comparison:
1. QSP Heavy Duty Pocket Knife Review
- Razor sharp 440C full edge Blade, HRC58-60, Non-Slip G10 Handle
- Left or Right Handed Flipper, Ball Bearing Smooth and Fast Opening
- G10 spine, Sturdy constructed, feel comfortable in hands
- Applicated for heavy duty work. 5.2" Handle, Net weight 177g, Good for Left...
Our top pick for the best pocket knife is the QSP Heavy Duty Pocket Knife with Ball Bearing Flipper Fast Opening. With a razor-sharp blade that stays sharp over the long term, a sturdy and comfortable ambidextrous handle, and a highly-responsive.
It sharp 440c full edge blade, and non-slip G10 handle.
The razor sharp design has a very sharp point that gives an excellent control, making the razor a perfect choice for detailed work, drilling and cutting.
However, the razor blade has a notch in the nail, which makes it easy and safe to open. On the other hand, locking machnisum ensure that the blade remains open and that you have strength and security while work.
What is the best steel for your needs you can check out 14c28n vs d2 comapared review.
2. Spyderco Dragonfly 2 Lightweight Salt Folding Knife
No products found.
If you searching locking folding knives that are safe, compact and easy carry then the Spyderco Dragonfly signature folding knife best choice.
The knife is hard to beat this small, lightweight package for regular use and carry. Even, the knife is imminently useful when you need it, but disappears into your pocket.
This is small knife. Even by EDC knife standards. So, it should in no way indicate pint-size capabilities. On the other hand the knife is surprisingly a brute of a knife.
As from features, keeping with Spyderco’s top-quality range, its design is matched by its materials. That comes with extremely capable, practical and portable. So, if you don’t lose it, you’ll love the knife.
For this perfect size, the knife is a perfect combination. That really very sharp and it’s professional design provides perfect handling to boot.
For this high-quality materials, it has managed to produce an astounding little knife. That is great for fine detail yet can tackle other everyday jobs.
440c vs vg10 Compared
What is 440c Steel
Especially 440c stainless steel is a high carbon martensitic stainless steel. That comes with high strength, moderate corrosion resistance, and perfect hardness and wear resistance.
On the other hand, it is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys.
14c28n vs 440c both sharpen easy and hold a good edge. 440c is the OG of knife steels on the other hand 14c28n easy to use and stainless steel. Get for full details you can check here.
What is vg10 steel
A knife is a tool with cutting edge often attached to a handle. When you have the best quality knife that does a better job of cutting, which is obvious enough, but it also lets you work faster and safer.
However, VG10 is a high-end Japanese stainless steel, that high in carbon and Vanadium. That is one of the best tool and most popular steels in Japan.
Is 440c steel good for knife?
If you looking for stainless steel, then you can use these 440c because it is mid-range stainless steel that provides perfect corrosion resistance and perfect water resistance and will take a wonderful mirror polish. That’s why this is good for knives and provides long-lasting using performance.
Is VG 10 stainless steel Good for knives?
The VG 10 stainless steel high-end with a balanced chemical composition provides perfect edge retention; wear resistance, corrosion resistance, hardness, and toughness.
That’s why the question is pretty obvious here.
Honestly, this is good for knives because it’s trendy in Japan if you’re working in a humid environment.
Is 440c steel easy to sharpen?
440c get most popularity for its blocky carbide structure and large grain. The steel can certainly take a sharp edge but will never be like razor blade steel. There is one the best advance it will cut through the carbides. Get for best result keep your synthetic stone clean and I’m pretty sure any of them can do that.
VG 10 Stainless Steel Equivalent
According to chemical data of steel and being high-end steel at the same time, we find that the VG-10 is close to the 154CM.
However, we still believe that this is perfect than the VG10, but they are both excellent in edge retention, wear resistance, corrosion resistance, and toughness, and they’re in the same price range.
7cr17mov vs 8cr13mov on this page you will get full details about these two steel.
440c steel hardness
440c is a martensitic 400 series stainless steel, and it the high-quality content from 400 stainless steel series. That is usually heat treated to reach hardness of 58-60 HRC. Use can use for this bearing steel, and use in rolling contact stainless bearing, e.g. ball bearings and roller bearings.
Vg10 steel hardness
The vg10 is very hard and also very tough. That comes with perfect edge retention and is surprisingly easy to sharpen. The steel made by Takefu Special Steel Company, that is a favorite by chefs for its perfect balance as a hard working knife and durability in that its edge can withstand long shifts. It comes with an HRC of 60-61.
440c steel composition
| Materials | Quantity | Works |
| Carbon | 1.1% | Improves hardness Wear/corrosion resistance Unfortunately a high amount of it decreases strength. |
| Sulfur | 0.02% | It will increases machinability |
| Molybdenum | 0.70% | It increase Machinability and strength |
| Manganese | 0.80% | It improves hardness and brittleness. |
| Chromium | 17.00% | Great for tensile strength and Edge retention. Even it enhances corrosion resistance and wears resistance. |
| Phosphorus | 0.20% | Improves strength. |
| Silicon | 0.50% | Great for strength. |
What are the VG 10 Stainless steel properties
However, according to the chemical composition and the HRC of the VG10 stainless steel, that provides the following properties:
Edge Retention: It comes with 60HRC steel. And the VG 10 is hard steel that offers great edge retention.
Corrosion Resistance: It includes 15.5% of chromium is great evidence of the excellent corrosion resistance of the VG10. For this reason, its one of the best steel for corrosion resistance.
Wear Resistance: This is high-end steel and with high carbon volume, that’s why the VG10 steel offers a great wear resistance.
Sharpness: Do you know is VG 10 steel easy to sharpen?
Yes. The combination of the VG 10 steel makes its hard steel and easy to sharpen at the same time. Therefore the sharpening experience won’t be so hard for the VG10.
Machinability: When you have these types knife the VG10 is very machinable and easy to grind.
Toughness: The VG10 is very sturdy steel, being stainless steel with a high level of chromium in it. And it has Molybdenum which gives it a high toughness and strength.
440c vs steel properties
| 440c | Vg 10 | Work |
| 2.5 | 5 | EDGE RETENTION |
| 7 | 6 | CORROSION RESISTANCE |
| 7 | 7 | EASE OF SHARPENING |
| 5 | 4 | TOUGHNESS |
440c Compared with Others Steel
8cr13mov vs 440c
According to our research 8Cr13MoV blade steel, 440C has a higher carbon (0.95-1.2%) and chromium (16-18%) content. On the other hand, 440c is a high grade and high wear resistant steel that comes with excellent edge retention.
When you compare these two brands, you can say 440c is a step-up model if we talk about hardness and edge retention.
vg10 vs 8cr13mov
VG10 comes with higher carbon that is more corrosion resistant and harder than Chinese steel but for daily use for 8cr13mov has still better edge plenty. In this two brand, due to higher alloying the toughness of vg10 is also lower than 8cr13mov.
In this two steel, one must know that vg10 is more prone to chipping, so for daily it is always better to choose 8cr13mov steel.
440c vs vg 10 – Final Verdict
Finally, we compared 440c vs vg10, which comes with similar features. For toughness, it might be VG-10; like Knarfengh said, more refined grain structure and more alloying generally lead to a higher toughness.
440c steel is considered the mid-range recipe in the 440c series that comes with 440A and 440B.
It comes with the highest carbon content in the entire 440 series.
Besides, vg10 is a stainless steel type with a – for stainless steel high carbon with 1%. The steel can makes vg10 harder than most stainless types. As for features, vg10 is easy to sharpen razor-sharp.